Contact us on +86-755 2909-1601/1602/1603 or websales@metal-domes.com

Metal Dome Rubber Glue Dome Array

Rubber Glue Dome Array


There's one layer of Rubber Glue on top of the Mayler or EMI. It has special Plastic performance and can be tightly stick on Keypad or PCBs. Because material of adhesive is Silicone, so it also named Silicon or Acrylic PSA adhesive tape.


Character:

Special Plastic performance and tightly stick on Keypad

EMI printing has been adopted on current Metal Dome switch, and the priority of EMI printing lies in controlling the impedance of printing surface below 1.0, which result in effect of prevention to Hertzian waves and electrometer, in this way, the tone can be dealt with on the surface

With the infiltration of static the effect of protecting the loop happened

Manufacturing engineering can be more difficult compared with the exist Metal Dome

Strong applicability to the changeable climate

Technical Parameter

Total Height:0.28-0.45 mm

Travel:0.13-0.30 mm

Scope of Force:100-400 gf

Tolerance of Force:±25 gf

Click Ratio:>30%

Life Cycles:>1 Million Cycles

Salt and Fog Examination:v35±2°C, 5±0.1%, 48H

Working Temperature:-20°C-50°C

Working Humidity:Under 100%RH

Touch Resistance:<1 ohm

ESD Resistance:<3 ohm

Dimension Tolerance:±0.05-±0.15mm


Are you interested in our products?

Contact information

Address: Best Technology Co, Limited 9E, Jindacheng Bld, Center Rd Shajing Town,Bao'an District Shenzhen, 518104, China


Contact

0755-2909-1601/02/03
0755-89492899
websales@metal-domes.com

Go to contact page

Copyright © 2019 Rubber Glue Dome Array-By Best Technology